Budget Threshold Ramp 1 inch (Available to 4 inch)

• Available in many heights
• Suitable for loads up to 5500 lbs!
• Made of 80% recycled rubber and 20% pure rubber
• Equipped with sloping sides, allowing drive-up from any angle

Looking for a suitable threshold ramp at a good price? Then this budget threshold ramp is definitely the right choice. The threshold ramp is available in heights from 1.0 in to 4.0 in, and is specially designed as a cheaper alternative to other threshold ramps.

You can use the threshold aid for almost any purpose. Among others for:

• Mobility scooter
• (electric) Wheelchair
• (electric) Bicycle
• Forklift truck
• Roll cages

Thanks to a threshold ramp, a threshold can again become a bridgeable obstacle with, for example, a wheelchair or mobility scooter. This threshold ramp is suitable for almost every purpose. Whether you want to use it with your mobility scooter, electric wheelchair or bicycle, it's all possible. The threshold ramp is made of 80% recycled rubber and 20% pure rubber and has a maximum load-bearing capacity of 5500 lbs. This budget threshold ramp is a relatively inexpensive solution. To ensure that this model has a better price, it has been shortened and therefore steeper than, for example, the Comfort Line threshold ramp. The budget threshold ramp does not slope down to 0.0 in, but to 0.24 -0.63 in (depending on the chosen height). This makes this budget model less suitable for vehicles with small wheels.

The budget threshold ramp does have sloping sides. This allows you to drive onto the threshold aid from any angle. These sloping sides also reduce the danger of falling. We can deliver the threshold ramp in heights from 1.0 in to 4.0 in. Thanks to the rubber, the budget threshold ramp can be used both indoors and outdoors. The threshold ramp has thin grooves for maximum grip. It also allows for better water drainage.

The budget threshold Ramp height is 1.0 inch and weighs 11 lbs

Assembly

No special assembly is required. You can place the threshold aid in the right place and its weight will keep it in place. If you would rather attach the threshold aid, you can do so with double-sided tape or mounting glue/sealant.

Maintenance

The threshold aid can be cleaned with vinegar or green soap. Then rinse well.

To choose the right size of the threshold aid, it is important to measure the threshold or elevation. Using a tape measure or tape measure, measure the distance between the rise and the floor. Also note the width of the threshold or rise.

Do you need a threshold support in a different height? Choose the product with the desired height below. Clicking on the name of the product will take you to the right page.