Threshold Ramp 1 inch (Available to 3 inch)
- Buy now, pay later!
- 35 years of medical experience
- Products are shipped out the same day
- Customers rate us 5/5 stars!
- Try-out for 14 days! Money back guarantee!
Product features
- Available in many heights
- Suitable for loads up to 5500 lbs!
- Fitted with sloping sides, allowing access from any angle
- Looking for a suitable threshold aid? This model with sloping sides is suitable for almost any purpose. The threshold aid is available in heights from 0.6 in to 3.0 in.
Indications for use
You can use the threshold aid for almost any purpose. Among others for:
- Mobility scooter
- (electric) Wheelchair
- Infusion trolley
- (electric) Bicycle
- Forklift
- Roll cages
General
Thanks to a threshold aid, a threshold can again become a bridgeable obstacle with, for example, a wheelchair or mobility scooter. This threshold aid is suitable for almost any purpose. Whether you want to use it with your mobility scooter, an electric wheelchair or rollator, it's all possible. The threshold aid is made of 100% recycled rubber and has a maximum load-bearing capacity of 5500 lbs. Thanks to the threshold aid's good angle of inclination and run-off to almost 0.00 inches, it is suitable for any aid or means of transport. Whether it is an infusion trolley with small wheels or a bicycle with large wheels, with this threshold aid you will ride up without any problems.
The advantage of this model is the sloping side surfaces. This allows you to drive up the threshold aid from any angle. These sloping sides also reduce the risk of falling. We can deliver the threshold aid in heights from 0.6 in to 3.0 in. The 1 inch threshold aid can be used both indoors and outdoors thanks to the rubber. The threshold aid has thin grooves for maximum grip. It also allows for better water drainage.
Product features
Dimensions | 2.5 x 20 x 90 cm |
Weight | 2.15 kg |
Colour | Black |
Material | 100% recycled rubber |
Maximum capacity | 2500 kg |
Available height versions | 1.5 - 7.5 cm |
Mounting
Because the threshold aid with sloping side surfaces is relatively heavier than, for example, the budget threshold aid, no special mounting is required. You can place the threshold aid in the right place and due to its weight, it will stay in place. If you would rather attach the threshold aid, you can do so with double-sided tape or mounting glue/sealant. The threshold aid can be trimmed to 4 cm with a Stanley knife.
Maintenance
The threshold aid can be cleaned with vinegar or green soap. Then rinse well.
EAN Codes
EAN |
---|
7081319716670 |